Shanghai Jianping Dynamic Balancing Machine Manufacturing Co., Ltd  Shanghai Jianping Dynamic Balancing Machine Manufacturing Co., Ltd

关于剑平banner

您当前位置:> >> COMPANY >> Jian ping News >> Company News

JP Clutch Pressure Plate Automatic Balancing Machine

时间:2023-11-03 13:04:04 点击数:139

JP Clutch Pressure Plate Automatic Balancing Machine

The clutch pressure plate is an important part of the automobile clutch system, which is responsible for transferring the power of the engine to the gearbox. In recent years, the quality of the clutch pressure plate is generally not high, resulting in the following problems in the operation of most cars:

1.The car jitters seriously when it starts or in reverse gear

2.The clutch pressure plate is worn, resulting in oil leakage of the main pump

3.The quality of the clutch pressure plate is not up to standard, resulting in serious vibration of the gearbox

In order to improve the quality of the clutch pressure plate and ensure that the car can drive smoothly, more and more manufacturers carry out the balancing test on the clutch pressure plate before installation, and the clutch pressure plate can be installed and used only after it passes the balancing test.

Main principle of clutch pressure plate balancing machine:

By detecting the distribution of the unbalance value of the clutch pressure plate during high-speed rotation, and according to the amount and angle

of the unbalance displayed on the HMI, the operator removes weight or adds weight at the corresponding position, which can improve the unbalance problem of the clutch pressure plate

In this regard, JP company developed and launched the clutch pressure plate special balancing machine, with the following highlights:

 (1) Wide compatibility 

 (2) Short cycle time

 (3) Fast changeover 

 (4) High balancing accuracy 

 (5) High work efficiency to achieve Mass productions 

 (6) Intelligent--robot /conveyor loading and unloading 

 (7) Data exchange and uploading are also feasible

 (8)Based Customer request to do customization 

In order to better control the quality of the clutch pressure plate, some suppliers will also require the addition of runout detection after balancing, that is, to detect the radial and axial runout of the clutch pressure plate, and this function can also be achieved by JP's balancing machine.

In short, in order to avoid the vehicle vibration and abnormal sound caused by the unbalance of the clutch pressure plate, improve the driving comfort and safety, and extend the service life of the clutch, it is very necessary for the manufacturer and maintainer of the clutch pressure plate to have a clutch pressure plate balancing machine.

700.jpg


chat with us